Skywalker's $55 one doesn't have a mast but you can grab a piece of conduit from Home Depot for ten bucks and cut in half and use one for each side.
On Tue, Jul 30, 2013 at 7:56 PM, Jeremy <[email protected]> wrote: > Or you could use one of these with a mast for 17.99 > http://skywalker.com/Products/Skywalker-Signature-Series-Non-Penetrating-Roof-Mount__SKY6003.aspx > > > > On Tue, Jul 30, 2013 at 7:55 PM, Jeremy <[email protected]> wrote: > >> Skywalker has essentially the same thing for $55 >> http://skywalker.com/Products/Skywalker-Signature-Series-Non-Penetrating-Roof-Mount-Base-%28mast-not-included%29__SKY32816.aspx >> >> >> On Tue, Jul 30, 2013 at 7:16 PM, Mike Lyon <[email protected]> wrote: >> >>> RF arnor has them for 75 dollars: >>> >>> >>> http://www.rfarmor.com/cart/index.php?main_page=product_info&products_id=48 >>> >>> -mike >>> >>> Sent from my iPhone >>> >>> On Jul 30, 2013, at 18:12, Dave Hulsebus <[email protected]> wrote: >>> >>> I used a 5 gallon bucket, a bag of quikcrete, and a pipe for a NS5 a few >>> years ago on a flat roof. >>> >>> ------------------------------ >>> *From:* [email protected] >>> [mailto:[email protected]<[email protected]>] >>> *On Behalf Of *Joey Craig >>> *Sent:* Tuesday, July 30, 2013 2:04 PM >>> *To:* WISPA General List >>> *Subject:* Re: [WISPA] Need small non-penetrating roof mount for single >>> Nanostation + 5ft mast >>> >>> We use wood pallets with cement blocks when needed. Wood pallets are >>> free for the asking most of the time from area businesses. >>> On Jul 30, 2013 12:58 PM, "Joshua Zukerman" <[email protected]> wrote: >>> >>>> Hello list, >>>> >>>> I am setting up a PtP link between two gas stations for a client. I am >>>> going to be using two Nanostation M5 units going about 1/2mi diagonally >>>> across a highway. I'd like to mount them to a 5ft mast then to a >>>> non-penetrating roof mount, as the only place with clear line-of-sight is >>>> on the roof of both gas stations. Flat roof without much of a lip to mount >>>> an antenna to. All of my Google searches come up with much larger >>>> non-penetrating roof mounts, 3' or wider, which are designed for much >>>> larger and taller masts. Also very pricey, $150 or more each. >>>> >>>> Does anyone make a small non-penetrating roof mount, say 2ft square out >>>> of metal with an attachment to hold a 5ft mast or including a 5ft mast? >>>> Maybe a single cinder/cement block to weigh it down would be all that is >>>> needed. Won't ever need to go higher. >>>> >>>> Or do you have another suggestion for mounting? >>>> >>>> Thanks in advance, >>>> >>>> Josh >>>> >>>> _______________________________________________ >>>> Wireless mailing list >>>> [email protected] >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> _______________________________________________ >>> Wireless mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >>> _______________________________________________ >>> Wireless mailing list >>> [email protected] >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> >> >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
