I used a 5 gallon bucket, a bag of quikcrete, and a pipe for a NS5 a few years ago on a flat roof.
_____ From: [email protected] [mailto:[email protected]] On Behalf Of Joey Craig Sent: Tuesday, July 30, 2013 2:04 PM To: WISPA General List Subject: Re: [WISPA] Need small non-penetrating roof mount for single Nanostation + 5ft mast We use wood pallets with cement blocks when needed. Wood pallets are free for the asking most of the time from area businesses. On Jul 30, 2013 12:58 PM, "Joshua Zukerman" <[email protected]> wrote: Hello list, I am setting up a PtP link between two gas stations for a client. I am going to be using two Nanostation M5 units going about 1/2mi diagonally across a highway. I'd like to mount them to a 5ft mast then to a non-penetrating roof mount, as the only place with clear line-of-sight is on the roof of both gas stations. Flat roof without much of a lip to mount an antenna to. All of my Google searches come up with much larger non-penetrating roof mounts, 3' or wider, which are designed for much larger and taller masts. Also very pricey, $150 or more each. Does anyone make a small non-penetrating roof mount, say 2ft square out of metal with an attachment to hold a 5ft mast or including a 5ft mast? Maybe a single cinder/cement block to weigh it down would be all that is needed. Won't ever need to go higher. Or do you have another suggestion for mounting? Thanks in advance, Josh _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
