Use NSM365 with a dish on all but the shortest links. Keep distances short, 4 miles or less.
AMQ above 80% TX CCQ above 75% RX level or -70 or better AMQ, TX CCQ, & RX level must ALL be at or above those values. Keep SM counts below 45 or so. Use KP Performance antennas or Ubiquiti antennas with RF Armor shields. Once the above is done, start saving money for the upcoming 3.65 PMP450 (don't hold your breath though) and replace the Ubiquiti gear when it becomes available. On Jul 31, 2013, at 9:01 AM, <[email protected]> <[email protected]> wrote: > We are putting up a 3.65 GHz system next week to take existing customers off > of an existing Canopy 2.4GHz system. > > Is there anyone who has deployed the 3 Ghz gear from Ubnt and could recommend > which model of CPE and if there anything to know to avoid a steep 'learning > curve' since we have never deployed anything from Ubiquiti until now. > > Suggestions as to the best prices are most welcome too! > > Thanks, > > Daniel > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
