Guess it depends on what you consider cheapest. Homerun to the roof
will add more labor, wiring complexity (and size) and you will probably
run into distance issues on a 15 story MDU.
On 10/29/2013 09:20 AM, Gino Villarini wrote:
Then I have to add a switch and ups on each floor... I was thinking of
home running all to the top floor... no?
Gino A. Villarini
[email protected] <mailto:[email protected]>
Aeronet Wireless Broadband Corp.
787.273.4143
*From:*[email protected] [mailto:[email protected]]
*On Behalf Of *Sam Tetherow
*Sent:* Tuesday, October 29, 2013 10:13 AM
*To:* WISPA General List
*Subject:* Re: [WISPA] MDU wiring
Switch on each floor, cat5e to each unit. If you have the ability,
wire each floor back to the telco room on the roof, otherwise you
could 'daisy-chain' each floor to the one above it back to the roof.
Second option has a lot more points of failure though.
On 10/29/2013 09:05 AM, Gino Villarini wrote:
Given the following scenario:
New MDU , 15 floors, telco room on top, telco closet on each floor
with conduit to each Unit... what would be the cheapest way to
wire this for Cat5 Ethernet?
Gino A. Villarini
[email protected] <mailto:[email protected]>
Aeronet Wireless Broadband Corp.
787.273.4143
_______________________________________________
Wireless mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
