The driving factor is # of units per floor, and distance to furthest port.
>From there you will be able to determine where your switches need to be. In
some cases we have had to split the building and put switches on every
other floor at both ends of the building because the horizontal run was too
long to get from the unit to the closet.

Typically the apartment will be wired internally to a terminal can in a
closet where your drop would be so it's only one drop per unit.




On Tue, Oct 29, 2013 at 8:13 AM, Mike Hammett <[email protected]>wrote:

> I don't know if you'd be within the distance limitations.
>
> TP-Link switches are pretty cheap.
>
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
> ------------------------------
> *From: *"Gino Villarini" <[email protected]>
> *To: *"WISPA General List" <[email protected]>
> *Sent: *Tuesday, October 29, 2013 9:20:44 AM
>
> *Subject: *Re: [WISPA] MDU wiring
>
>  Then I have to add a switch and ups on each floor… I was thinking of
> home running all to the top floor… no?
>
>
>
> Gino A. Villarini
>
> [email protected]
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
> *From:* [email protected] [mailto:[email protected]] *On
> Behalf Of *Sam Tetherow
> *Sent:* Tuesday, October 29, 2013 10:13 AM
> *To:* WISPA General List
> *Subject:* Re: [WISPA] MDU wiring
>
>
>
> Switch on each floor, cat5e to each unit.  If you have the ability, wire
> each floor back to the telco room on the roof, otherwise you could
> 'daisy-chain' each floor to the one above it back to the roof.  Second
> option has a lot more points of failure though.
>
> On 10/29/2013 09:05 AM, Gino Villarini wrote:
>
> Given the following scenario:
>
>
>
> New MDU , 15 floors, telco room on top, telco closet on each floor with
> conduit to each Unit… what would be the cheapest way to wire this for Cat5
> Ethernet?
>
>
>
> Gino A. Villarini
>
> [email protected]
>
> Aeronet Wireless Broadband Corp.
>
> 787.273.4143
>
>
>
>
>  _______________________________________________
>
> Wireless mailing list
>
> [email protected]
>
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
>
> _______________________________________________
> Wireless mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> _______________________________________________
> Wireless mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to