Sounds like a network loop or packet storm not sure why SM's are working fine..
Are your AP's @ SM's on different SUBNETS or VLAN's?—
Sent from Mailbox for iPhone
On Thu, Jan 2, 2014 at 10:48 PM, Eric Muehleisen <[email protected]>
wrote:
> Run wireshark while on the GUI and see if anything interesting shows up
> On Thursday, January 2, 2014, heith petersen wrote:
>> Since last week I have been struggling with a 450 AP, our first one. I
>> don’t appear to be losing any performance, but the interface is struggling,
>> taking almost 30 seconds to show the page after switching tabs. I am
>> pumping 20 megs easily to 6 subs, 3 that are disabled. I was told by a
>> vendor that there were some issues with the first run radios like this,
>> however they have been working good, for the last year or whenever they
>> came out. We updated the software this morning on all gear, AP & SMs, with
>> the same results. We switched out the AP today with one on the shelf with
>> fresh firmware, with the same results. When these are on the bench they
>> seem real responsive, but I am on the same subnet as the radios as well. I
>> have 2 of these on a network 3 hours away that we connect and manage via
>> routing via Mikrotik and act great. I don’t want to say that I have a
>> network issue, which seems likely. I just wanted to see what others thought
>> or if had similar issues
>>
>> thanks
>> heith
>> mnwireless
>>
>>
> --
> Sent via mobile
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless
