Did notice while screwing around with ethernet settings, I set the 450 to 100 full hard coded and my Mikrotik 732 to auto and the 450 interface flashed me a few times at 1000f, but went back to 100f, though the 732 only detected it at 100f
From: timothy steele Sent: Thursday, January 02, 2014 9:56 PM To: WISPA General List Cc: WISPA General List Subject: Re: [WISPA] Cambium 450 Slow Interface Sounds like a network loop or packet storm not sure why SM's are working fine.. Are your AP's @ SM's on different SUBNETS or VLAN's? — Sent from Mailbox for iPhone On Thu, Jan 2, 2014 at 10:48 PM, Eric Muehleisen <[email protected]> wrote: Run wireshark while on the GUI and see if anything interesting shows up On Thursday, January 2, 2014, heith petersen wrote: Since last week I have been struggling with a 450 AP, our first one. I don’t appear to be losing any performance, but the interface is struggling, taking almost 30 seconds to show the page after switching tabs. I am pumping 20 megs easily to 6 subs, 3 that are disabled. I was told by a vendor that there were some issues with the first run radios like this, however they have been working good, for the last year or whenever they came out. We updated the software this morning on all gear, AP & SMs, with the same results. We switched out the AP today with one on the shelf with fresh firmware, with the same results. When these are on the bench they seem real responsive, but I am on the same subnet as the radios as well. I have 2 of these on a network 3 hours away that we connect and manage via routing via Mikrotik and act great. I don’t want to say that I have a network issue, which seems likely. I just wanted to see what others thought or if had similar issues thanks heith mnwireless -- Sent via mobile -------------------------------------------------------------------------------- _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
