Forgot to mention the auto height is also now part of your EUS emails as well so it will now show how high the client needs to be for a signal.
Jim From: [email protected] [mailto:[email protected]] On Behalf Of Jim Patient Sent: Friday, April 18, 2014 12:35 PM To: WISPA General List Subject: Re: [WISPA] Who is using Towercoverage.com ? Ok folks, we are still working on this. We now have it set to auto run the rx side height on link paths (up to 200' but will increase this soon to 300' for max approximate PoE distance). You will see on a link there is a Minimum Antenna Height for Rx. If you hover over it. It will show the calculated path to reach your Rx side threshold. We are assuming the AP side stays constant and the client side moves. You would need to reverse the sides to move the AP side up. If you're area has a lot of trees, I would suggest cranking up your land cover % on the trees to around 500% depending on your area. The higher you set this the more forest loss you will see when it encounters trees. I extended the WISPA promo code for those of you that haven't tried this. The promo code field is in the account settings. Thx, Jim Patient Office: 314-735-0270 towercoverage.com <http://towercoverage.com/> linktechs.net <http://linktechs.net/> wlan1.com <http://wlan1.com/> From: [email protected] [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Wednesday, April 09, 2014 2:19 PM To: WISPA General List Subject: Re: [WISPA] Who is using Towercoverage.com ? I'm not talking about customers plotting where their address is. What I'm getting at is if I have a customer called in, I'd like to just punch in the location and then see if they'll work at ground level or how high we need to get off the ground and see the signal change as I increment height. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Apr 9, 2014 at 3:16 PM, Clay Stewart < [email protected]> wrote: Josh. You can. Just put the web snip on a website. If need help can walk u through later today. Our websire customer lookup... http://www.towercoverage.com/iframemc.asp?mcid=1223&Acct=2910 On Apr 9, 2014 3:08 PM, "Josh Luthman" <[email protected]> wrote: I'm having a hard time adjusting to this from Radio Mobile. There's all the same "stupid" interface shortfalls, for example wanting to know what a customer's CPE would be without adding a site and putting them in the same list. I feel with technology as it is, it shouldn't be so convoluted to simply put a dot on a map and see what the signal would be from a tower while being able to adjust the elevation on the fly. I'm wondering if there's another list/forum for this service, too. There's no way I'm going write a bible of questions for support, it doesn't make a whole lot of sense for either of us. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
<<image001.png>>
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
