Dang that sounds hot. Can we see screen shots?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Apr 18, 2014 at 1:37 PM, Jim Patient <jpati...@linktechs.net> wrote: > Forgot to mention the auto height is also now part of your EUS emails as > well so it will now show how high the client needs to be for a signal. > > > > Jim > > > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On > Behalf Of *Jim Patient > *Sent:* Friday, April 18, 2014 12:35 PM > > *To:* WISPA General List > *Subject:* Re: [WISPA] Who is using Towercoverage.com ? > > > > Ok folks, we are still working on this. We now have it set to auto run > the rx side height on link paths (up to 200’ but will increase this soon to > 300’ for max approximate PoE distance). You will see on a link there is a > Minimum > Antenna Height for Rx. If you hover over it. It will show the calculated > path to reach your Rx side threshold. We are assuming the AP side stays > constant and the client side moves. You would need to reverse the sides to > move the AP side up. > > > > If you’re area has a lot of trees, I would suggest cranking up your land > cover % on the trees to around 500% depending on your area. The higher you > set this the more forest loss you will see when it encounters trees. > > > > I extended the WISPA promo code for those of you that haven’t tried this. > The promo code field is in the account settings. > > > > Thx, > > > > Jim Patient > > Office: 314-735-0270 > > towercoverage.com > linktechs.net > > wlan1.com > [image: qr_new_cell] > > > > > > > > > > *From:* wireless-boun...@wispa.org > [mailto:wireless-boun...@wispa.org<wireless-boun...@wispa.org>] > *On Behalf Of *Josh Luthman > *Sent:* Wednesday, April 09, 2014 2:19 PM > *To:* WISPA General List > *Subject:* Re: [WISPA] Who is using Towercoverage.com ? > > > > I'm not talking about customers plotting where their address is. What I'm > getting at is if I have a customer called in, I'd like to just punch in the > location and then see if they'll work at ground level or how high we need > to get off the ground and see the signal change as I increment height. > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Apr 9, 2014 at 3:16 PM, Clay Stewart < > cstew...@stewartcomputerservices.com> wrote: > > Josh. You can. Just put the web snip on a website. If need help can walk u > through later today. Our websire customer lookup... > http://www.towercoverage.com/iframemc.asp?mcid=1223&Acct=2910 > > On Apr 9, 2014 3:08 PM, "Josh Luthman" <j...@imaginenetworksllc.com> > wrote: > > I'm having a hard time adjusting to this from Radio Mobile. There's all > the same "stupid" interface shortfalls, for example wanting to know what a > customer's CPE would be without adding a site and putting them in the same > list. I feel with technology as it is, it shouldn't be so convoluted to > simply put a dot on a map and see what the signal would be from a tower > while being able to adjust the elevation on the fly. > > > > I'm wondering if there's another list/forum for this service, too. > There's no way I'm going write a bible of questions for support, it > doesn't make a whole lot of sense for either of us. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > > > > _______________________________________________ > Wireless mailing list > Wireless@wispa.org > http://lists.wispa.org/mailman/listinfo/wireless > >
<<inline: image001.png>>
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless