Add another vlan to wan interface, not bridged. Assing mngmt ip
Gino A. Villarini President Aeronet Wireless Broadband Corp. www.aeronetpr.com @aeronetpr On 7/1/14, 5:25 PM, "Josh Reynolds" <j...@spitwspots.com> wrote: >So, new question. > >Special project. > >"cpe" Router has a management ip >"cpe" Router has a separate vlan piped to it as well > >I had lan -> bridged -> vlan, with vlan assigned to wan interface. This >gave me a layer2 tunnel. My problem here, is that I don't have much real >visibility or testing capability over the separate vlan. > >So I'd like to create an EOIP tunnel between the devices over the >separate vlan, but I'm running into issues figuring out what goes where. > >So you've got a lan interface, wan interface, vlan that sits on the wan, >eoip tunnel, and a bridge or two, and another ip that goes on the vlan >or eoip tunnel for them to communicate over the vlan. > >Soooooo: > >Create vlan >assign vlan to wan interface >create eoip tunnel >assign ip address to vlan interface ? >bridge ( lan, vlan, eoip tunnel) ? > > >-- > >Josh Reynolds > >Chief Information Officer >SPITwSPOTS > > >------------------------------------------------- >Animal Farm Microwave Users Group - www.afmug.com > > _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless