How long is the link ? If you are dead on with the scopes then you are off on the link :), they scopes are always off a bit... What firmware are you running ?
Have you tried the alignment mode ? setup one side a TX and the other as RX and then reverse that What do you get when you do that... Aligning them can be an exercise in patience ! Feel free to call me, I will be more than happy to help. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Chadwick Wachs" <[email protected]> > To: "WISPA General List" <[email protected]> > Sent: Wednesday, June 15, 2016 7:55:04 PM > Subject: [WISPA] Any IgniteNet MetroLinq customers out there > I have been trying for a couple days to get a new PTP60-35 60 GHz link up and > running with no luck. Looking for some help / suggestions from anyone who has > been successful getting links up. The 5 GHz link is working but 60 never > trains > up. I bought the spotting scopes and each end is dead center. Good old > fashioned up/down/left/right aiming methods do not seem to work either and > IgniteNet is lacking in the support department. > Anyone want to contact me off list if you have any suggestions on what worked > for you? > Thanks, > Chad > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
