Aiming takes patience, the scopes aren't perfect but a huge help. We found that turning off auto MCS and using fixed lower rate helped a lot. Make sure you have the newest firmware, I believe there are more updates coming out soon as well. IgniteNet support was responsive and very helpful when we had questions.
Rob Genovesi • Coastside.Net • Owner 650-712-5900 • 525B Obispo Rd • Half Moon Bay CA On Wed, Jun 15, 2016 at 4:55 PM, Chadwick Wachs <[email protected]> wrote: > I have been trying for a couple days to get a new PTP60-35 60 GHz link up > and running with no luck. Looking for some help / suggestions from anyone > who has been successful getting links up. The 5 GHz link is working but 60 > never trains up. I bought the spotting scopes and each end is dead center. > Good old fashioned up/down/left/right aiming methods do not seem to work > either and IgniteNet is lacking in the support department. > > Anyone want to contact me off list if you have any suggestions on what > worked for you? > > Thanks, > Chad > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
