Could be a bad odu, trasmit power failing is somewhat common, we've had two ptp 820S fail in the past two years, different reasons. Submit a ticket. They'll have you power cycle, replace all the cabling, try direct dc wire, replace the power and then 4 months later you might get a new one on RMA. If it is a bad one I suggest avoiding all that, buying a second one verifying whether or not it was the problem then have them make it right.
Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Gino Villarini <[email protected]> Date: 1/29/17 10:52 AM (GMT-07:00) To: WISPA General List <[email protected]> Subject: Re: [WISPA] Issues turning up Cambium 820S Ran the Loppback Site 1 provided MSE of -42 and RSSI of -34 Site 2 provided a low RSSI (-71) and MSE of 0 From: <[email protected]> on behalf of Jon Langeler <[email protected]> Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 Reply-To: WISPA General List <[email protected]> Date: Sunday, January 29, 2017 at 1:44 PM To: WISPA General List <[email protected]> Subject: Re: [WISPA] Issues turning up Cambium 820S Firmware version? Jon Langeler Michwave Technologies, Inc. On Jan 29, 2017, at 12:40 PM, Gino Villarini <[email protected]> wrote: <!-- .EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; } --> I have: Radio 1, Admin UP , Operational UP Radio 2, Admin UP , Operational Down Funny thing is, we used 1 script for alignment ( 5 mhz channel, low modulation), Aligned, got target, changed script to bigger channelŠ kaputt! On 1/29/17, 11:50 AM, "[email protected] on behalf of Seth Mattinen" <[email protected] on behalf of [email protected]> wrote: Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> >On 1/29/17 2:38 AM, Gino Villarini wrote: >> This is what I have >> >> > > >Platform -> Manager -> Interface Manager >Check for admin up. > >Did you check the stickers to make sure you didn't get shipped two of >the same unit instead of a high/low pair? I don't know if the UI would >let you configure the frequencies backwards, can't say I've tried that >on any of mine. > >~Seth >_______________________________________________ >Wireless mailing list >[email protected] >http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
