Expected signals? Something like -10 if they're a box of paper apart?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 31, 2017 at 12:34 PM, Gino Villarini <[email protected]> wrote: > So we took the radios down, turn them up on the bench, They link up > perfectly.. > > What the heck! > > Im at loss > > From: <[email protected]> on behalf of Gino Villarini < > [email protected]> > > > > *Gino Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > Reply-To: WISPA General List <[email protected]> > Date: Monday, January 30, 2017 at 4:47 AM > > To: WISPA General List <[email protected]> > Subject: Re: [WISPA] Issues turning up Cambium 820S > > Its slotted. We are doing SISO on this link > > From: <[email protected]> on behalf of Jon Langeler < > [email protected]> > > > > *Gino Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > Reply-To: WISPA General List <[email protected]> > Date: Sunday, January 29, 2017 at 10:59 PM > To: WISPA General List <[email protected]> > Subject: Re: [WISPA] Issues turning up Cambium 820S > > Dual pol antennas? Make sure you have the hollow or circular waveguide as > opposed to slotted. Not sure.. > > Jon Langeler > Michwave Technologies, Inc. > > > On Jan 29, 2017, at 12:51 PM, Gino Villarini <[email protected]> wrote: > > 8.7 > > From: <[email protected]> on behalf of Jon Langeler < > [email protected]> > > > > *Gino Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> > Reply-To: WISPA General List <[email protected]> > Date: Sunday, January 29, 2017 at 1:44 PM > To: WISPA General List <[email protected]> > Subject: Re: [WISPA] Issues turning up Cambium 820S > > Firmware version? > > Jon Langeler > Michwave Technologies, Inc. > > > On Jan 29, 2017, at 12:40 PM, Gino Villarini <[email protected]> wrote: > > I have: > > Radio 1, Admin UP , Operational UP > Radio 2, Admin UP , Operational Down > > Funny thing is, we used 1 script for alignment ( 5 mhz channel, low > modulation), Aligned, got target, changed script to bigger channelŠ > kaputt! > > On 1/29/17, 11:50 AM, "[email protected] on behalf of Seth > Mattinen" <[email protected] on behalf of [email protected]> > wrote: > > > > *Gino Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> > >On 1/29/17 2:38 AM, Gino Villarini wrote: > >> This is what I have > >> > >> > > > > > >Platform -> Manager -> Interface Manager > >Check for admin up. > > > >Did you check the stickers to make sure you didn't get shipped two of > >the same unit instead of a high/low pair? I don't know if the UI would > >let you configure the frequencies backwards, can't say I've tried that > >on any of mine. > > > >~Seth > >_______________________________________________ > >Wireless mailing list > >[email protected] > >http://lists.wispa.org/mailman/listinfo/wireless > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > > > _______________________________________________ > Wireless mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/wireless > >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
