Same signal on both sides When installed, the problem was that te RF interface was always down on one side. IT is up on the bench
From: <[email protected]<mailto:[email protected]>> on behalf of Christian Palecek <[email protected]<mailto:[email protected]>> Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png] Reply-To: WISPA General List <[email protected]<mailto:[email protected]>> Date: Tuesday, January 31, 2017 at 1:43 PM To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Issues turning up Cambium 820S Itd be hard to tell if the transmit is damaged on a bench test unless you had a reference for comparison. Same signal on either side? Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Josh Luthman <[email protected]<mailto:[email protected]>> Date: 1/31/17 10:36 AM (GMT-07:00) To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Issues turning up Cambium 820S Expected signals? Something like -10 if they're a box of paper apart? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 31, 2017 at 12:34 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: So we took the radios down, turn them up on the bench, They link up perfectly.. What the heck! Im at loss From: <[email protected]<mailto:[email protected]>> on behalf of Gino Villarini <[email protected]<mailto:[email protected]>> Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png] Reply-To: WISPA General List <[email protected]<mailto:[email protected]>> Date: Monday, January 30, 2017 at 4:47 AM To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Issues turning up Cambium 820S Its slotted. We are doing SISO on this link From: <[email protected]<mailto:[email protected]>> on behalf of Jon Langeler <[email protected]<mailto:[email protected]>> Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png] Reply-To: WISPA General List <[email protected]<mailto:[email protected]>> Date: Sunday, January 29, 2017 at 10:59 PM To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Issues turning up Cambium 820S Dual pol antennas? Make sure you have the hollow or circular waveguide as opposed to slotted. Not sure.. Jon Langeler Michwave Technologies, Inc. On Jan 29, 2017, at 12:51 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: 8.7 From: <[email protected]<mailto:[email protected]>> on behalf of Jon Langeler <[email protected]<mailto:[email protected]>> Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> Reply-To: WISPA General List <[email protected]<mailto:[email protected]>> Date: Sunday, January 29, 2017 at 1:44 PM To: WISPA General List <[email protected]<mailto:[email protected]>> Subject: Re: [WISPA] Issues turning up Cambium 820S Firmware version? Jon Langeler Michwave Technologies, Inc. On Jan 29, 2017, at 12:40 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: I have: Radio 1, Admin UP , Operational UP Radio 2, Admin UP , Operational Down Funny thing is, we used 1 script for alignment ( 5 mhz channel, low modulation), Aligned, got target, changed script to bigger channelŠ kaputt! On 1/29/17, 11:50 AM, "[email protected]<mailto:[email protected]> on behalf of Seth Mattinen" <[email protected]<mailto:[email protected]> on behalf of [email protected]<mailto:[email protected]>> wrote: Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> >On 1/29/17 2:38 AM, Gino Villarini wrote: >> This is what I have >> >> > > >Platform -> Manager -> Interface Manager >Check for admin up. > >Did you check the stickers to make sure you didn't get shipped two of >the same unit instead of a high/low pair? I don't know if the UI would >let you configure the frequencies backwards, can't say I've tried that >on any of mine. > >~Seth >_______________________________________________ >Wireless mailing list >[email protected]<mailto:[email protected]> >http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
