Thank you, now it works. I removed everything and installed the latest hg release.
Best, davide 2008/9/24 Davide Anchisi <[EMAIL PROTECTED]>: > I will try that way, > > Thanks, > > Davide > > 2008/9/24 Alex Kilgore <[EMAIL PROTECTED]>: >> I had similar problems at one point, I still dont know what caused them, but >> I was able to work around the issue by removing most of wmii's components >> and installing the latest hg release...not a fix but a solution, could have >> been some leftovers from a previous install or something, as i think my >> wmii.sh was messed up along with some other stuff >> Thanks >> Alex >> >> Davide Anchisi wrote: >>> >>> I still cannot use M+p to run any program. >>> >>> Now the report in ~/.xsession-errors: >>> wmiir: fatal: Can't open file '/rbar/status': file not found >>> is gone (and the status bar was always ok). >>> >>> Any other idea were to look or what to do? >>> >>> Thanks for any help, >>> >>> Davide >>> >>> >>>> I compiled and installed wmii (snapshot: wmii+ixp-20080520) on a new >>>> machine, and I cannot run any program using M+p. >>>> Typing the name of an application it gets displayed in the bar, but after >>>> pressing enter the program does not start. >>>> M+a and M+enter are working properly. >>>> Runnig programs from a terminal does not cause any problem. >>> >>>> I'm using: >>> >>>> dmenu-3.9 >>>> plan9port-20080909 >>>> libixp (it should be 0.5, I got it via hg clone >>>> http://code.suckless.org/hg/libixp, but this should not be relevant as >>>> the snapshot I installed has its own libixp) >>>> GNU/Linux Ubuntu 8.04 >>> >>> >> >> >> >
