To my knowledge, there are 3 modes of SSL in WS_FTP. SSL 1: If the SSL connection fails, the script will end. SSL 2: If the SSL connection fails, and the remote server has SSL configured, the user is asked if the remote certificate should be added to the Trusted Authority database. If the remote server is not SSL enabled, the user is asked if an unsecured connection should be made. SSL 3: If the SSL connection fails, an unsecured connection will be made automatically. However, no matter which mode I used in my script, it never works. It just hang at the "234 SSL enabled and waiting for negotiation" (according to the trace). This happens after I remove the ca root cert from the Trusted Authority database in WS_FTP Pro 7.5 for testing purpose. Anyone tested these 3 modes before and found them to be working as stated by ipswitch? If yes, pls advise. Jason Lee Systems Executive E-Commerce DID : 65-6374-0503 TEL : 65-6272-0533 FAX : 65-6272-2334 Network For Electronic Transfers (S) Pte Ltd 298 Tiong Bahru Road #04-01/06 Central Plaza Singapore 168730 http://www.nets.com.sg ******************************************************************************** IMPORTANT NOTICE: This email and any files transmitted with it is intended only for the use of the person(s) to whom it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, please immediately notify the sender and delete the email. Thank you. ******************************************************************************** Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list.
