Greetings-- I'm trying to get wjjt-x working on an old Windows XP box and my Kenwood TM-V71 (+ RC-D710 upgrade) and having some issues. On the Windows PC, I have a USB-to-serial cable with the Prolific driver, and I know it works, since I successfully run APRSISCE/32.
The RC-D710 purportedly gives all the same functionality as the TM-D710, but I'm wondering whether there might be a subtle data port difference. On my rig, there's a data port on the back of the TM-V71, and another on the back of the D710 control head. What I've found is that the Kenwood memory programming software only works if I use the data port on the back of the TM-V71. But APRSISCE/32 works if I use the data port on the back of the D710 control head. Now for WSJT-X -- I basically get no response if I use the data port on the back of the control head. But if I use the data port on the back of the TM-V71 base unit, WSJT-X (when testing) can trigger the TX of the radio, but doesn't appear to do anything else. Is there a special driver needed for the RC-D710 port setup? A bug in the software? Or should I be thinking about upgrading to the TM-D710? Or perhaps I've set up something wrong -- should the rig be in Packet mode or not? 73, KD0KZE Paul Bramscher ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
