On 07/04/2015 05:05, Scott McClements wrote: Hi Scott, > Greetings - I am using a Kenwood TS-590S and wsjtx-1.4.0 rc5-win32. > In the drop down list for the CAT baud rates, the list only goes to > 57600. Would it be possible to add faster rates to the list? Hopefully > its just a matter of adding the values to the drop down list. > > I realize I can change the baud rate in the TS-590S, but I am using a > complex COM port sharing arrangement that requires me to use 115200. 57.6 kBaud is sufficient for any CAT traffic between WSJT-X and you rig. If you have other traffic then WSJT-X is not going to work reliably since the Hamlib library used by WSJT-X is synchronous and cannot handle unsolicited traffic.
Generally, dumb virtual serial port splitters that simply replicate serial port traffic to multiple clients are not supported. If you need to have multiple clients for your rig's CAT port then you must use a smart intermediary such as OmniRig or the Hamlib network rig control server. > > 73, > Scott McClements, WU2X > 73 Bill G4WJS. ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
