On 07/04/2015 17:12, Scott McClements wrote: Hi Scott,
I am sure the 4800 baud is sufficient for the purposes of WSJT-X.
Probably yes.
I'm not sure using USB and RS-232 in parallel on the TS-590s(g) will help much as I believe the CAT output from the rig is mirrored on both comms ports.I will try the dual ports (using the USB and Serial ports at the same time). Though I have control over the software based serial splitting being used to the point that I can filter traffic between ports. I just can't run the ports at different speeds.
I have checked in a change to include 115.2 kBaud as a serial port speed option in WSJT-X, this will appear in the next release (v1.5).
73, Scott, WU2X
73 Bill G4WJS.
On Tue, Apr 7, 2015 at 7:11 AM, Yannick DEVOS (XV4Y) <[email protected] <mailto:[email protected]>> wrote:Hi Scott, Bill, Scott, another solution is to use both CAT ports of the TS-590S/SG. The TS-590 has two ports : USB and RS-232. It has the ability (unique in the market as far as I know) to handle CAT traffic on both ports simultaneously. Many operators use the USB port to control the transceiver from a computer and connect the RS-232 port to a decoder to do band changing on antennas selectors. Of course, sending contradicting commands at the same time can damage the rig, so be careful with this. 73, Yan - XV4Y. --- http://www.qscope.org/ > Le 7 avr. 2015 à 17:20, Bill Somerville <[email protected] <mailto:[email protected]>> a écrit : > > On 07/04/2015 05:05, Scott McClements wrote: > Hi Scott, >> Greetings - I am using a Kenwood TS-590S and wsjtx-1.4.0 rc5-win32. >> In the drop down list for the CAT baud rates, the list only goes to >> 57600. Would it be possible to add faster rates to the list? Hopefully >> its just a matter of adding the values to the drop down list. >> >> I realize I can change the baud rate in the TS-590S, but I am using a >> complex COM port sharing arrangement that requires me to use 115200. > 57.6 kBaud is sufficient for any CAT traffic between WSJT-X and you rig. > If you have other traffic then WSJT-X is not going to work reliably > since the Hamlib library used by WSJT-X is synchronous and cannot handle > unsolicited traffic. > > Generally, dumb virtual serial port splitters that simply replicate > serial port traffic to multiple clients are not supported. If you need > to have multiple clients for your rig's CAT port then you must use a > smart intermediary such as OmniRig or the Hamlib network rig control server. >> >> 73, >> Scott McClements, WU2X >> > 73 > Bill > G4WJS. >
------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
