Re: Bill's implementation:

Hi Bill,

Could you please add the ability to select rhe bands for TX. When band
hopping I would like to be able to TX on just some of the bands chosen for
RX, as per John's implementation (because of antenna limitations and/or
local licence conditions).

Thanks to all for the nice software.

Tony VK2AJF

On Thursday, June 4, 2015, Bill Somerville <[email protected]> wrote:

> On 03/06/2015 19:00, John Nelson wrote:
> > Hi Bill,
> Hi John,
> >
> > Is this the type of hot switching you are referring to?   (From my WSPR
> log - UDP status output.)
> >
> > ---
> > 14:39:53: Dial: 28124600, Mode: WSPR-2, DX_Call: G4KLA, Report: -15,
> TX_Mode: WSPR-2, TX_Enabled: 1, Transmitting: 0
> > 14:39:53: Dial: 10138700, Mode: WSPR-2, DX_Call: G4KLA, Report: -15,
> TX_Mode: WSPR-2, TX_Enabled: 1, Transmitting: 0
> > 14:39:53: Dial: 28124600, Mode: WSPR-2, DX_Call: G4KLA, Report: -15,
> TX_Mode: WSPR-2, TX_Enabled: 1, Transmitting: 0
> > 14:39:57: Dial: 10138700, Mode: WSPR-2, DX_Call: G4KLA, Report: -15,
> TX_Mode: WSPR-2, TX_Enabled: 1, Transmitting: 0
> > ---
> The potential hot switching I am referring to is what would happen if a
> user defined hardware switching routine, for example to change aerials,
> was still in progress when the tune up signal started i.e. switching a
> relay when it is passing Tx RF.
> >
> > Band hopping:
> >
> > Do you have in mind producing a selection table with tune up similar to
> that in the WSPR guide?   This provides a flexible choice of tune-up as
> well as TX fractions
> Currently the only band hopping supported is according to the globally
> coordinated schedule, the constraints of that schedule do not allow for
> per band Tx fractions. Tune up is specified on a per band basis but only
> for the 10 coordinated bands.
>
> My implementation current looks like this:
>
> https://dl.dropboxusercontent.com/u/4192709/band-hopping.JPG
>
> >
> > --- John G4KLA
> 73
> Bill
> G4WJS.
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> wsjt-devel mailing list
> [email protected] <javascript:;>
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
Sent from Gmail Mobile
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to