An additional note... Clicking "Tx Enable" from an off (false) state will start a WSPR2 transmission at any point in time during the current 2-minute cycle (per status bar "Tx: ....."), but only audio is produced if the Tx Enable is clicked prior to ODD_MIN:30 (ie. 30 seconds into the odd minute).
The program even goes into transmission (again, per status bar message in lower left), but with no audio, between odd:52 and odd:59 and stays stuck in limbo forever (never goes back to Monitor nor produces a real transmission)!! Again, just tested w/ r5578 73 Eric NO3M On 06/10/2015 06:49 PM, Eric NO3M wrote: > Having problems with WSPR2 TX here. > > WSJTX 1.6.0-devel r5578 (same problems with r5567 also before doing SVN > update/re-compile) > Band: 630m > Tx 1575 Hz > Tx Pct 33% > Upload Spots = true > Band Hopping = false > > As soon as I click Tx Enable, regardless of how far into a 2-minute > period it is clicked, WSJTX immediately starts transmitting the WSPR > message. After the current 2-minute period is over (odd-minute:52), > audio ceases but the status on the lower left of the main window remains > "Tx: WG2XJM EN91 37" indefinitely and the program never goes back to > "Monitor" nor produces any further real transmissions (ie. audio). > ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
