You can adjust the left edge of the waterfall in the WSPR instance That's the "Start XXX Hz" entry. Just set it to 700 Hz. Then you can adjust the Bins/Pixel to only see the WSPR band too.
73 Mike W9MDB -----Original Message----- From: Mike [mailto:[email protected]] Sent: Saturday, June 13, 2015 12:02 PM To: [email protected] Cc: Mike Subject: [wsjt-devel] -5578 dual WSPR and JT65/9 use via two instances. Hi, Is there any way two instances of WSJTX can share the same audio on 30 meters with one of them receiving the audio shifted by 700 Hz ? I run a JT65/9 monitor - it sits on 10.138 MHz, the WSRP region is 700 Hz above that yet with another instance of WSJTX monitoring it always (as expected) receives the 10.138 feed, is there a way to tell WSJTX to consider the band start 700 Hz up, or via some kind of vfo offset? Alternative I can take the radio audio via a 700 Hz shift and output that to a new pulseaudio sink which the other WSJTX in WSPR mode can use - but thought to ask if a simple offset is possible first. Use case would be dual monitoring on 30 meters, both JTxx and WSPR. BR Mike OH2FCZ. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
