Jean Louis, Joe - Does this happen only if you have never touched TX Pct since starting the program?
When you observed this behavior what was the TX Pct? How long did you run with no transmissions? In particular, did you go for a full 2 hours with no transmission? If so, then does the scheduler eventually kick in after 2 hours with no transmission? I haven’t changed anything in the wspr tx scheduler recently. I know that Bill adjusted the band selection algorithm not too long ago, but that shouldn’t have involved the scheduler. I just looked at the code, and it seems that the tx table should be automatically generated the first time that next_tx_state() is called. I’ll also note that the statistics of the scheduler may “feel” different when TX Pct is less than 17%, as a different algorithm is used in that regime. Steve k9an > On Jul 6, 2015, at 6:32 PM, Joe Taylor <[email protected]> wrote: > > Hi Jean Louis and all, > > I have not yet tried to trace the cause, but I have also observed the > behavior you describe. In WSPR mode, WSJT-X can stop initiating any Tx > sequences, even though "Enable Tx" remains ON (red background). > > I think Bill (or was it Steve?) made the most recent changes to the T/R > scheduler. Is it possible that somehow the T/R table becomes lost, or > is not re-calculated when that should happen? > > -- Joe, K1JT > > On 7/6/2015 9:20 AM, f5djl wrote: >> Hello to all >> >> While testing the patch kindly provided by Mike for the rig control of FT991 >> ( thanks Mike and it seems to work smoothly for WSPR/991) , I noticed the >> following (BTW observed on two different TX configurations FT897 and FT >> 991) : >> >> 1/WSPR seems stuck in RX mode despite the enable TX button being red . >> >> 2/ Just changing the TXPct % seems to resume the transmit process ( I >> understand this action forces to recalculation of the table used by the >> scheduler ) >> >> 3/ I tried a TX next button before changing the TX pct , and although it >> triggered a single transmission it did not resume the scheduler. >> >> 4/ I have not yet managed to figure what could have stopped TX process , >> is it the automatic ( every two hours ?) recalculation not happening or >> something else not sure . >> >> 5/ I have seen it working for several hours without problem so it is not >> always the case . >> >> Any advice on how to better capture the condition which lead to TX process >> stopping will be much appreciated ( I had a look at WSPR_history file and >> except the absence of TX slot could not see anything obvious) >> >> Latest tests were performed on Win 8.1 , 1.6.0-dev r 5685 with FT897 and >> FT991 . >> >> Very best regards >> >> Jean Louis F5DJL >> >> >> >> PS : If anybody has hand-on experience with FT991 in DATA-USB mode thru the >> TRX internal audio card ( ie audio via internal USB interface ) , please >> contact me direct as the setting of the DSP filter in that specific mode ( >> Data-USB not USB) on the unit at hand does not perform as per the page 58 >> the manual ! I will be interested to share experience with another owner of >> FT 991) . I have also joined FT991 group as this is not specific to WSJT >> modes. > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
