Bonsoir Jean-Louis,
firstly, thanks for all the detailed testing and reporting of this
issue, that is appreciated.
The main issue turned out to be that 20% was being treated specially and
not in a good way. As of revision 5700 in the development trunk
^/branches/wsjtx this defect should be resolved.
73
Bill
G4WJS.
On 06/07/2015 14:20, f5djl wrote:
Hello to all
While testing the patch kindly provided by Mike for the rig control of
FT991 ( thanks Mike and it seems to work smoothly for WSPR/991) , I
noticed the following (BTW observed on two different TX
configurations FT897 and FT 991) :
1/WSPR seems stuck in RX mode despite the enable TX button being red .
2/ Just changing the TXPct % seems to resume the transmit process (
I understand this action forces to recalculation of the table used by
the scheduler )
3/ I tried a TX next button before changing the TX pct , and
although it triggered a single transmission it did not resume the
scheduler.
4/ I have not yet managed to figure what could have stopped TX
process , is it the automatic ( every two hours ?) recalculation not
happening or something else not sure …
5/ I have seen it working for several hours without problem so it
is not always the case .
Any advice on how to better capture the condition which lead to TX
process stopping will be much appreciated ( I had a look at
WSPR_history file and except the absence of TX slot could not see
anything obvious)
Latest tests were performed on Win 8.1 , 1.6.0-dev r 5685 with FT897
and FT991 .
Very best regards
Jean Louis F5DJL
PS : If anybody has hand-on experience with FT991 in DATA-USB mode
thru the TRX internal audio card ( ie audio via internal USB
interface ) , please contact me direct as the setting of the DSP
filter in that specific mode ( Data-USB not USB) on the unit at hand
does not perform as per the page 58 the manual ! I will be interested
to share experience with another owner of FT 991) . I have also joined
FT991 group as this is not specific to WSJT modes.
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
