Hi Joe, Steve, Are these updates in the main wsprd binary, or do we still need to build the wsprd_exp binary and copy it over to wsprd to test the changes?
73's Greg, KI7MT On 7/28/2015 12:22 PM, Joe Taylor wrote: > Hi Steve, > > Nice job with implementation of a sequential decoder using the Jelinek > Stack Algorithm! > > I have now run some reasonably thorough tests of it, comparing results > with the default Fano decoder in wsprd. I confirm essentially all of > your basic conclusions. Jelinek with maxcycles=5000 produces nearly the > same results, in the same execution time, as Fano with maxcycles=10000. > > In my tests the command-line "-d" option produced about 7-8% more > decodes, at the cost of roughly 5 x longer execution time. Again, this > was true for both Fano and Jelinek. > > Now we know... which is good! > > -- Joe, K1JT > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
