Hi Greg,
The experimental ("Jelinek") decoder is currently being built only as
wsprd_exp.
-- Joe
On 7/28/2015 3:08 PM, Greg Beam wrote:
> Hi Joe, Steve,
>
> Are these updates in the main wsprd binary, or do we still need to build
> the wsprd_exp binary and copy it over to wsprd to test the changes?
>
> 73's
> Greg, KI7MT
>
> On 7/28/2015 12:22 PM, Joe Taylor wrote:
>> Hi Steve,
>>
>> Nice job with implementation of a sequential decoder using the Jelinek
>> Stack Algorithm!
>>
>> I have now run some reasonably thorough tests of it, comparing results
>> with the default Fano decoder in wsprd. I confirm essentially all of
>> your basic conclusions. Jelinek with maxcycles=5000 produces nearly the
>> same results, in the same execution time, as Fano with maxcycles=10000.
>>
>> In my tests the command-line "-d" option produced about 7-8% more
>> decodes, at the cost of roughly 5 x longer execution time. Again, this
>> was true for both Fano and Jelinek.
>>
>> Now we know... which is good!
>>
>> -- Joe, K1JT
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
