On 30/08/2015 19:41, Steven Franke wrote: Hi Steve, > Joe - > Now trying to TX. The rig is a TS480 keyed using CAT. WSPR mode works fine. > The Tune function in jtmsk also seems to work - the TX is keyed up and a tone > is emitted - but the tone frequency sounds lower than the selected 1500 Hz. > After disabling Tune, I then selected Enable TX (with CQ selected as the > message). The transmitter is keyed and the program segfaults, leaving the rig > keyed. I re-compiled with all Debugging enabled. The trace does not show > anything obviously wrong. The last few lines in the trace are included below: The tracing currently only covers rig control. This looks like a crash elsewhere, hence the normal rig control trace output.
Try running under gdb and reproducing the segmentation fault. The break context, particularly the stack trace back of the the faulting thread should help to locate the issue. ... 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel