First problem I ran into. Switching bands on my TenTec Omni VII changes the bandwidth to 2400 every time. Previously bandwidth was never touched.
RRR Mike W9MDB On Wed, Apr 6, 2016 at 12:25 PM, Bill Somerville <[email protected]> wrote: > Hi All, > > I have just committed a bunch of changes that I have been working on for > some time. Some are potentially disruptive and I welcome any testing of > rig control using the various modes. For those using WSJT-X for EME, > particularly on the microwave bands, any reports on testing the Doppler > shift tracking will be valuable. > > For now rig control should be considered alpha quality at best so keep a > close eye on the rig to ensure that the Tx and Rx frequency are correct, > especially when transmitting. > > For Icom rig users, there are recent Hamlib changes that are relevant so > ensure that you update your Hamlib build as well. I would recommend that > all who build WSJT-X update their workspace and rebuild Hamlib as the > Hamlib team are very close to cutting v3.1 which will hopefully be the > one that gets used with WSJT-X in the future, once it percolates into > all the latest distributions. As it stands at the time of writing my > Hamlib fork integration branch is identical to the Hamlib official > master branch. > > 73 > Bill > G4WJS. > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
