Use rigctl-wsjtx to test your radio and report back what it says.
rigctl-wsjtx -m 227 -r com1 -s 9600 -vvvvv
Try to read/set freq, vfo, split, mode, and ptt
Those are example com port and baud.
You don't say what error you're getting. de Mike W9MDB
From: Edfel Rivera <edfelj...@gmail.com>
To: wsjt-devel@lists.sourceforge.net
Sent: Wednesday, August 3, 2016 5:40 PM
Subject: [wsjt-devel] Kenwood TM V71 not recognized - WSJTX Devel
Hi:
Thank you very much for the work on WSJTX. Not problem at all use HF, it
recognizes my Kenwood 480 and I could make QSO from 6m to 80m.
However when trying to explore VHF other modes besides JT65 JT9, WSJTX Devel is
not able to recognize the rig (Kenwood TM v71). Both rigs use signalink USB as
TNT.
Thanks.
Last build used 6979
Edfel
KP4AJ
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
