Try using the "Kenwood D710" rig in Hamlib. I've used it on my D710 and
it works (though technically NOT supported by Kenwood) though when NOT
in Echolink mode. See
https://groups.yahoo.com/neo/groups/TM-D710_TM-V71/files/TM-V71%20and%20TM-D710%20Commands%20/
for a full definition of the CAT commands that were determined to be
available on the D710 and V71.
Kenwood_TM-D710_and_RC-D710_CTRL_Head_Commands.pdf Kenwood
TM-D710/RC-D710 CTRL Head Control Commands. - Rev. 03
49 KB - arcticpeak - Apr 2, 2009
Kenwood_TM-V71_and_TM-D710_Main_Unit_Commands.pdf Control Commands for
the TM-V71 and TM-D710
252 KB - arcticpeak - Apr 2, 2009
Kenwood_TM-V71_and_TM-D710_Commands.xls The complete spreadsheet of
control commands for TM-V71/TM-D710/RC-D710 - Rev. 11
147 KB - arcticpeak - Apr 2, 2009
Guide.pdf Guide on how to manually enter commands to
TM-V71/TM-D710/RC-D710 - Rev. 01
7 KB - arcticpeak - Apr 2, 2009
DTMF.pdf DTMF Table - Rev. 01
7 KB - arcticpeak - Apr 2, 2009
DCS_table.pdf DCS Table - Rev. 01
7 KB - arcticpeak - Apr 2, 2009
Tone_CT_table.pdf Tone and CT Table - Rev. 01
7 KB - arcticpeak - Apr 2, 2009
Step_table.pdf Step Table - Rev. 01
7 KB - arcticpeak - Apr 2, 2009
MENU_tables.pdf MENU Tables - Rev. 01
9 KB - arcticpeak - Apr 2, 2009
--David
KI6ZHD
On 08/05/2016 08:58 AM, Black Michael wrote:
Well that rig isn't recognizing the standard kenwood ID command.
I tried to find the CAT protocol for this thing and had no luck at all.
If somebody has a reference perhaps we can fix this thing.
Is there a difference between TM-V7 (in hamlib) and TV-V71?
There is also some serial snooping software you can install which can
watch what the working software is doing....that would be another way
to find out the CAT protocol.
de Mike W9MDB
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
