Well that rig isn't recognizing the standard kenwood ID command.I tried to find the CAT protocol for this thing and had no luck at all. If somebody has a reference perhaps we can fix this thing. Is there a difference between TM-V7 (in hamlib) and TV-V71? There is also some serial snooping software you can install which can watch what the working software is doing....that would be another way to find out the CAT protocol. de Mike W9MDB
From: Edfel Rivera <edfelj...@gmail.com> To: wsjt-devel@lists.sourceforge.net Sent: Wednesday, August 3, 2016 7:08 PM Subject: Re: [wsjt-devel] Kenwood TM V71 not recognized - WSJTX Devel Hi: First there was a 'typo' on previous post I mean signalink USB TNC. Error I am getting is this: Rig failure Hamlib error: Communcation timed out while opening connection to rig Did the command instructed: rigctl-wsjtx -m 227 -r com5 -s 9600 -vvvvv Output: (JTSDK-QT 5.2 ) C:\JTSDK\wsjtx\devel\qt52\1.7.0\Release\install\bin)rigctl-wsjtx -m 227 -r com5 -s 9600 -vvvvv rigctl, Hamlib 3.1~git Report bugs to <hamlib-develo...@lists.sourceforge.net> rig:rig_init called initrigs3_kenwood called rig_register (213) rig_register (201) rig_register (225) rig_register (203) rig_register (204) rig_register (216) rig_register (224) rig_register (205) rig_register (207) rig_register (209) rig_register (210) rig_register (222) rig_register (214) rig_register (230) rig_register (221) rig_register (229) rig_register (238) rig_register (202) rig_register (211) rig_register (206) rig_register (208) rig_register (215) rig_register (226) rig_register (217) rig_register (233) rig_register (220) rig_register (223) rig_register (227) rig_register (234) rig_register (231) rig_register (239) rig_register (237) rig_register (228) rig_register (219) rig_register (232) rig_register (236) kenwood_init called kenwood_init: if_len = 37 rig:rig_open called kenwood_open called kenwood_get_id called kenwood_transaction called kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction called kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_open: no response from rig rig_open: error = Communication timed out (JTSDK-QT 5.2 ) C:\JTSDK\wsjtx\devel\qt52\1.7.0\Release\install\bin)rigctl-wsjtx -m 227 -r com5 -s 9600 -vvvvv rigctl, Hamlib 3.1~git Report bugs to <hamlib-develo...@lists.sourceforge.net> rig:rig_init called initrigs3_kenwood called rig_register (213) rig_register (201) rig_register (225) rig_register (203) rig_register (204) rig_register (216) rig_register (224) rig_register (205) rig_register (207) rig_register (209) rig_register (210) rig_register (222) rig_register (214) rig_register (230) rig_register (221) rig_register (229) rig_register (238) rig_register (202) rig_register (211) rig_register (206) rig_register (208) rig_register (215) rig_register (226) rig_register (217) rig_register (233) rig_register (220) rig_register (223) rig_register (227) rig_register (234) rig_register (231) rig_register (239) rig_register (237) rig_register (228) rig_register (219) rig_register (232) rig_register (236) kenwood_init called kenwood_init: if_len = 37 rig:rig_open called kenwood_open called kenwood_get_id called kenwood_transaction called kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction called kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_open: no response from rig rig_open: error = Communication timed out (JTSDK-QT 5.2 ) C:\JTSDK\wsjtx\devel\qt52\1.7.0\Release\install\bin)rigctl-wsjtx -m 227 -r com5 -s 9600 -vvvvv rigctl, Hamlib 3.1~git Report bugs to <hamlib-develo...@lists.sourceforge.net> rig:rig_init called initrigs3_kenwood called rig_register (213) rig_register (201) rig_register (225) rig_register (203) rig_register (204) rig_register (216) rig_register (224) rig_register (205) rig_register (207) rig_register (209) rig_register (210) rig_register (222) rig_register (214) rig_register (230) rig_register (221) rig_register (229) rig_register (238) rig_register (202) rig_register (211) rig_register (206) rig_register (208) rig_register (215) rig_register (226) rig_register (217) rig_register (233) rig_register (220) rig_register (223) rig_register (227) rig_register (234) rig_register (231) rig_register (239) rig_register (237) rig_register (228) rig_register (219) rig_register (232) rig_register (236) kenwood_init called kenwood_init: if_len = 37 rig:rig_open called kenwood_open called kenwood_get_id called kenwood_transaction called kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = ID write_block(): TX 3 bytes 0000 49 44 0d ID. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction called kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889201 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_transaction: cmdstr = FA write_block(): TX 3 bytes 0000 46 41 0d FA. read_string(): Timed out 0.889202 seconds after 0 chars kenwood_open: no response from rig rig_open: error = Communication timed out I am using Rt System KRS-V71 and program is able to connect to radio and read memories and settings. COM port is 5. Thanks again. Edfel KP4AJ ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
