Hello Bob-

Make a new ICON with the --rig-name="60M"

parameter. Then configure the instance for JT9 mode and set the fence at
100 cycles.
Hope this helps.

Here is one of my ICONs

Bill W2PKY

On Thu, Sep 22, 2016 at 8:13 AM, George J Molnar <geo...@molnar.com> wrote:

> A Configuration setup would seem to be the answer for you. Clone your
> default JT65/9 settings and save the result as a 60m configuration after
> adjusting the blue line to 100 Hz or so.
>
> Good luck!
>
> George J. Molnar
> @GJMolnar
>
> On Sep 22, 2016, at 4:29 AM, Bob KD7YZ <kd...@denstarfarm.us> wrote:
>
> On 20-Sep-16 2339, George J Molnar wrote:
>
> You can adjust the "blue line" in WSJTX above which the program is JT65
>
> and JT9 "bilingual.
>
>
>
> Drawback would be if at my old age I( forgot to re-set it to 2500 as I
> switched off of the 60m band.
>
> If the WF settings were logged for each band then that would work for me.
>
> I know it's a tight band-plan, this is obvious. What  want to do is make
> sure I am decoding both modes in the narrow band so I don't miss a reply
> or a CQ whilst I am in the "other" mode.
>
>
>
> --
> 73,
> Bob KD7YZ
>
>
> ------------------------------------------------------------
> ------------------
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> ------------------------------------------------------------
> ------------------
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to