1.1? That would be a really old version. The 7300 wasn't in that version.
Can't you compile a more recent version?
de Mike W9MDB
On Tue, Feb 28, 2017 at 9:15 PM, signalhz signalhz <[email protected]>
wrote:
> I have similar problems
>
> I cant get WSJT-X v 1.1, r3496 to work using rig control while on Linux
> Mint 18.1 64 bit 'Serena' & cant get any audio to the programs from the USB
> Codec. I get "Failed to start audio input stream. " & "PortAudio says
> requested sound card format not supported. I am using Timewave Navigator. I
> don't see Icom 7300 in the drop down list for rig control. I am not real
> familiar with Linux Mint yet.
>
> I have FlDigi working fine on Linux
>
> Now on Windows some reason WSJT-X loses audio to TX some times but not
> often. I have to close the program & re-open it to get audio back.
>
> Help would be appreciated.
>
> 73 Eddy N4ABN
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
>
> _____________________________
> From: Pino Zollo <[email protected]>
> Sent: Tuesday, February 28, 2017 4:01 PM
> Subject: [wsjt-devel] IC-7300 USB-D --> IC-7300 control lost
> To: <[email protected]>
>
>
> Hi Bill,
>
> El 28/02/17 a las 15:45, [email protected]
> escribió:
> > what version of WSJT-X are you using?
>
> 1.7.0 last version distributed via PPA on Mint 17.3
>
> >
> > The WSJT-X "Settings->Radio->Mode" options determine if WSJT-X controls
> > the mode of your rig and whether USB or USB-DATA mode is used.
> >
> Found the solution into the WSJT-X configuration....now it is stable in
> USB-D.
>
> > With Icom rigs you must disable "CI-V Transceive Mode" in the rig's
> > menu, this option which is on by default causes unsolicited CAT traffic
> > that can give unexpected and undesirable behaviour.
> >
> TU done...
>
> > You should also do a basic RFI check by doing a test transmission into a
> > dummy load or at least on minimum power on the rig. There have been a
> > few reports of what appears to be RFI issues with the USB interface on
> > the IC-7300.
>
> The problem is present also in RX only, without TXing.
>
> ...after few minutes of operation the PC loses the control of the radio
> and opens a window to ask for retry or leave.
>
> ...also the audio gets lost and I have to restart WSJT-x to get the
> control again.
>
> >
> > 73
> > Bill
> > G4WJS.
>
> Best 73
>
> Pino ZP4KFX
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
