On 10/07/2017 07:06, Lloyd Kirk wrote:
I might have missed it somewhere but all my newer wsjtx builds now
have 3.5726 as the wspr frequency.
It was and (still being used) 3.5926 I do not know when it was changed.
Lloyd Kirk
WB5HUP
Hi Lloyd,
you did indeed miss the messages. When we switch the protocol around for
FT8 and also included the new working frequencies facilities Joe made an
announcement here and on the Yahoo wsjtgroup:
https://sourceforge.net/p/wsjt/mailman/message/35933865/
The salient text about 80m was:
Previous 80 m use of JT modes has done a disservice to JA operators, who
have no privileges on the current WSPR/JT65/JT9 allocations. To correct
this we have moved the allocations to a part of the band where JAs can
operate. Obviously this change will impact other non-WSJT-X users, so
for now we suggest that if you intend to operate on 80 m JT65/JT9/WSPR
then you manually change the working frequencies in WSJT-X
("Settings->Frequencies") back to the old allocations until a general
availability release of WSJT-X v1.8.0 is published. This will allow time
for other software teams to coordinate with us.
The old allocations are:
JT65 3.567 MHz
JT9 3.578 MHz
WSPR 3.5926 MHz
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
