Thanks Bill. I built and installed 7939. You mentioned " Auto sequencing
has been made generic such that it can be used for more than one mode if
desired."
Does this mean JT9/65? If so where do you toggle it on?
73,
Tom - KQ5S
On Mon, Jul 24, 2017 at 2:35 PM, Bill Somerville <g4...@classdesign.com>
wrote:
> Hi All,
>
> I have finally got to a point where I can commit the large round of
> changes that came from doing the above. The change (r7939) comment is this:
>
> +++++++++++++++++++++++++++++
>
> Add the option to ALT+click a decoded CQ or QRZ message which only
> moves the Rx frequency to theirs, this facilitates calling a station
> who is busy and may have many callers on their frequency. Updated the
> corresponding mouse shortcuts help text.
>
> Allow for times with seconds when parsing fast mode and FT8 decodes.
>
> Exclude the RR73 grid square from and grid validation or matching, it
> is not a grid square any more as far as WSJT-X is concerned, it is an
> RRR substitute.
>
> Add a simple state machine for QSO progress such that replies and
> auto-sequencing can be better controlled.
>
> Get compound callsign edge cases working again and allow QSOs from and
> to compound callsign holders working in as many situations as possible
> including auto-sequencing and FT8 auto-reply mode. This does mean
> that a "DE W6/K1ABC DM93" type message close to a callers Tx or Rx
> frequency will be taken as a reply to a CQ call despite it not being
> explicitly addressed back to the CQ caller. Compound callsigns should
> work in MSK144 contest mode also as well as in short code modes with
> some minor restrictions (short codes will not be used where
> configuration demands that a message be used to send a full compound
> callsign).
>
> Auto sequencing has been made generic such that it can be used for
> more than one mode if desired.
>
> Allow the use of free text messages to sign off in auto sequenced QSOs
> without the message being overwritten by the sequencer. Double click
> actions have been added to the Tx5 radio and push buttons to revert
> back to the default standard 73 message.
>
> Make DisplayText class interface more idiomatic C++ and simplify a
> bit.
>
> Fixed some displayed widget arrangements for different modes and
> sub-modes so that they are consistent when starting up and when
> switching mode or sub-mode.
>
> This is a big change which has been extensively tested but no doubt
> there will also be some new defects introduced.
>
> -----------------------------------------------
>
> Which does not do justice to the days of testing and re-fixing issues it
> has taken to get to this point. I want this change to go into WSJT-X v1.8.0
> RC2 but I am aware that it is an awfully large change to drop in at this
> late stage, nevertheless I feel it fixes more critical issues than it
> introduces. Currently it is only in the development branch but I urge those
> brave enough to build the development branch to try it and report back. You
> should note that the development branch also contains FT8 decoder changes
> that are not yet finalized and may mis-behave so beware. The FT8 decoder
> changes are reasonably stable at present but watch the change log for
> comments about usability on air please.
>
> 73
> Bill
> G4WJS.
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
