Hi Bill I just built r7939 and Sh messages in JT4 and QRA64 now seem to be working correctly with Type 1 compound mycall.
73 Charlie > Hi All, > > I have finally got to a point where I can commit the large round of > changes that came from doing the above. The change (r7939) comment is > this: > > +++++++++++++++++++++++++++++ > > Add the option to ALT+click a decoded CQ or QRZ message which only > moves the Rx frequency to theirs, this facilitates calling a > station > who is busy and may have many callers on their frequency. Updated > the > corresponding mouse shortcuts help text. > > Allow for times with seconds when parsing fast mode and FT8 decodes. > > Exclude the RR73 grid square from and grid validation or matching, > it > is not a grid square any more as far as WSJT-X is concerned, it is > an > RRR substitute. > > Add a simple state machine for QSO progress such that replies and > auto-sequencing can be better controlled. > > Get compound callsign edge cases working again and allow QSOs from > and > to compound callsign holders working in as many situations as > possible > including auto-sequencing and FT8 auto-reply mode. This does mean > that a "DE W6/K1ABC DM93" type message close to a callers Tx or > Rx > frequency will be taken as a reply to a CQ call despite it not > being > explicitly addressed back to the CQ caller. Compound callsigns > should > work in MSK144 contest mode also as well as in short code modes > with > some minor restrictions (short codes will not be used where > configuration demands that a message be used to send a full > compound > callsign). > > Auto sequencing has been made generic such that it can be used for > more than one mode if desired. > > Allow the use of free text messages to sign off in auto sequenced > QSOs > without the message being overwritten by the sequencer. Double > click > actions have been added to the Tx5 radio and push buttons to > revert > back to the default standard 73 message. > > Make DisplayText class interface more idiomatic C++ and simplify a > bit. > > Fixed some displayed widget arrangements for different modes > and > sub-modes so that they are consistent when starting up and > when > switching mode or sub-mode. > > This is a big change which has been extensively tested but no > doubt > there will also be some new defects introduced. > > ----------------------------------------------- > > Which does not do justice to the days of testing and re-fixing issues it > has taken to get to this point. I want this change to go into WSJT-X > v1.8.0 RC2 but I am aware that it is an awfully large change to drop in > at this late stage, nevertheless I feel it fixes more critical issues > than it introduces. Currently it is only in the development branch but I > urge those brave enough to build the development branch to try it and > report back. You should note that the development branch also contains > FT8 decoder changes that are not yet finalized and may mis-behave so > beware. The FT8 decoder changes are reasonably stable at present but > watch the change log for comments about usability on air please. > > 73 > Bill > G4WJS. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
