On 23/07/2017 21:26, Chip Hood via wsjt-devel wrote:
Rig controlled split operation does not work for a TS-590SG using Ham
Radio Deluxe. It will momentarily work (rig in split and WSJT-X rig
control indicator green with an S) but will drop out of split both on
the rig and the indicator in WSJT-X after a second or two (and after
first transmit.)
This happens when using Ham Radio Deluxe connected to the rig,
selecting "Ham Radio Deluxe" in WSJT-X for the Rig and using "Rig" for
split operation.
When "Fake it" is selected the WSJT-X rig control indicator shows
green and an S but the rig does not actually change frequency on
transmit although the frequency indicator in WSJT-X does show a
frequency change (rig does not change frequency)
When HRD is disconnected and WSJT-X rig control is set to the Kenwood
TS-590SG all works as it should (split functions properly). The
issues arises only when WSJT-X connects through Ham Radio Deluxe. When
WSJT-X connects directly to the rig split functions properly.
This also occurs with prior versions of WSJT-X and HRD.
Current Setup:
WSJT-X v1.8.0-rc1
Rig: Kenwood TS-590SG
Ham Radio Deluxe 6.4.0.664
Rig connected to computer via USB port
WSJT-X settings on the Radio Tab:
Rig:"Ham Radio Deluxe"
Poll Interval: 1s
PTT Method: CAT
Transmit Audio Source: Rear/Data
Mode: USB
Split Operation: Rig
Thanks for any insight on this small issue for a great piece of software.
Chip -- KM4AF
Hi Chip,
can you send me the file %LOCALAPPDATA%"\WSJT-X\HRD Interface
Information.txt" please?
The file can be found most easily by going to "Menu->File->Open Log
Directory" in WSJT-X.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
