On 02/09/2017 19:08, Rick wrote:
Checking Monitor returns to last used frequency for each configuration
does recall the last frequency used, however it does not recall the
default frequency for the operating mode selected.
Hi Rick,
it is doing what it promises, i.e. returning to the last used frequency.
Used in this context means the last frequency when monitor was enabled.
The intention is that you can click "Monitor" off and then operate in
another mode, e.g. work a new one on CW or phone on the same or anther
band, then when done click "Monitor" on and return to exactly where you
were. I believe this fits your requirement in that each configuration
will return to where it last was at so long as it has "Monitor off at
startup" unchecked and "Monitor returns to last used frequency" checked.
If the former is checked then you will need a further step to return to
the last used frequency i.e. click "Monitor" on. If the latter is
unchecked then starting WSJT-X or switching to a configuration with that
setting will be passive and not change the rig. there is a caveat to
that last statement as some rigs require some changes to be made to the
rig when opening the CAT connection to discover its current state
(mostly Icom rigs).
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
