I just subscribed to you list. This email was rejected because I was not a
member. Thanks.
On Sat, Mar 31, 2018 at 5:07 PM, W. Chris Bailey <[email protected]> wrote:
> I am currently running: WSJT-X v1.8.0 r8193 on Windows 10. I am using a
> MFJ 1204 USB Radio Interface for my sound card, it is linked to my PC and
> my Yaesu FT 991. I use Ham Radio Deluxe (6.4.0.794) and have that selected
> as my “Rig”. I control the receive and transmit volume through the MFJ
> 1204. I am very careful to keep the receive (mic) at around 50 dB on the
> bar graph. When I transmit I ensure my ALC meter does not register at all
> on any outgoing transmissions.
>
>
>
> I do have multiple options for sound on my PC due to external speakers but
> my MFJ 1204 is selected in the “Settings” for both Input and Output for
> WSJT-X. (same settings I use in my HRD software)
>
>
>
>
>
>
>
> There have been two main issues that happen spuraticly. I have not been
> able to nail down the causes as of yet.
>
>
>
> 1. There are times when I first start up my pc and WSJT-X that it will
> only decode one or two signals at a time when there are dozens of signals.
> My filter width is set to 3000Hz. ( I never change this). The only way
> I have found to get WSJT-X to work correctly is to uninstall the sound card
> drivers and re-install them. Sometimes it take a couple of try’s of
> uninstalling and re-installing to get it to work. This does not happen
> every time I start up, but about one in every four.
>
>
>
> 1. There are times that when making a contact that my PPT does not
> release at the end of the 15 seconds. It will continue showing I am
> transmitting up to 5-6 seconds into the next transmission cycle. My
> transmission of data will end before my 15 seconds are complete but WSJT-X
> will not receive data until it has release my PPT. I frequently miss the
> replay message from my contact. This seems to happen on specific
> contacts, and across different bands. I can then click on a different
> contact in the same band immediately afterwards and it will work fine.,
> but if I go back the previous contact it will happen again. I does seem
> to happen more when the contact is closer to actual frequency I have dialed
> in and less when I get farther down the band width.
>
>
>
> If you need any more details I would be happy to respond.
>
>
>
> I do love the software and the FT8 language.
>
>
>
> 73
>
> Chris, K5OUI
>
>
>
>
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
