Hi !
On October 10, 2017 I have suggested to disable TX also when split
answering and answer goes to someone else to avoid unnecessary qrm.
But we are the minority and we have to live with it.
--
Saku
OH1KH
Ed Wilson via wsjt-devel kirjoitti 11.05.2018 klo 14:19:
Tom,
My understanding is that this is not a bug, but is by design. I would
prefer that Tx would be disabled in this situation, but others think
just the opposite. I believe that the reasoning is that if you
continue to call a station (off frequency), then you might be next in
his queue when he wraps-up his current contact. If you are on the same
frequency, the software disables transmit to avoid QRM.
Ed, K0KC
k...@arrl.net
http://k0kc.us/
On Friday, May 11, 2018, 3:32:45 AM EDT, Tom M0LTE <t...@m0lte.uk> wrote:
Good morning
A quick search of the archive didn't turn up anything, so reporting just
in case it isn't known. (I'm fairly sure it must be.)
Software version: WSJT-X v1.9.0-rc4
Mode: FT8
Auto seq enabled
Hold Tx Freq ticked
When responding to a CQ by double clicking the left pane, when I have
different TX and RX frequencies set, if the CQer responds to someone
else, my station does not drop out of TX mode - instead keeps sending
DXCALL MYCALL IO91.
Example:
071300 -8 0.2 623 ~ CQ EA7HG IM87
071315 Tx 703 ~ EA7HG M0LTE IO91
071345 Tx 703 ~ EA7HG M0LTE IO91
071400 -10 0.2 623 ~ HA7JIV EA7HG RR73
071415 Tx 703 ~ EA7HG M0LTE IO91 <----
When the TX and RX frequency is the same, the software correctly stops
sending.
Observed both with No Split and Rig Split. I don't use Fake It.
Apologies if this is already known about.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
