John C. Westmoreland, P.E. kirjoitti 06.06.2018 klo 21:42:
After operating and changing bands; I will use my tuner; and the
program will either hang or will pop up a window saying the rig has
become unresponsive. I can click 'retry' sometimes and it'll be ok -
but a consistent issue that will happen is it will either become
completely unresponsive - with TX stuck; or I will get an error
message saying hamlib I/O has suffered an error, and TX is stuck.
Hi!
I have IC706 with LDG Z-100Plus. Auto tuning is set from rig's menu and
control cable exists between rig and LDG. So it will start tuning
process every time on first TX when band is changed. Normally that 1st
TX is pressing "tune" button of wsjt-x after band change.
It is completely normal getting wsjt-x prompt "rig not responding" 99%
of the time.
That is because rigctld does run to timeout because rig is not
responding to cat commands during tuning. And LDG has (according to
manual) 1,5 sec tail after the best match is set. Said according to
manual, as sometimes I feel that the delay from LDG led showing ok to
time it drops TX feels much longer.
Answering "Retry" *after LDG has dropped rig's TX* will continue normal
operation.
That could, maybe, be fixed by setting rigctld timeout bigger. But that
cannot be done via wsjt-x radio setup. Then rigctld must be started as
separate command line process to get wanted parameters in use, and after
that open the wsjt-x with setting radio/Hamlib Net rigctl/localhost:4532
to get access to rigctld.
I have been too lazy to test this longer timeout, just accepted that I
need to press "retry" after every tuning session.
Os here is Fedora 27 linux.
With my little experience from past years I wonder how you can stand
Vista? Slowest OS I have never seen. I'm sure that it makes also a part
of your problems. Not everything is coming from RF leaks as suspected here.
--
Saku
OH1KH
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
