OK, lets ask the obvious:
1. You've checked that the frequencies do appear in the list in settings.
2 You are selecting the frequency from the drop-down
This is why I have a completely separate configuration, I don't have to
mess with finding the correct frequency from a bunch setup on 20m,
there's only the one.
Neil, KN3ILZ
On 6/28/2018 11:47 AM, John L. Broughton wrote:
I did add the Baker Island frequencies to the list in WSJT-X. However,
I cannot use them using the drop down menu. Whatever standard
frequency I am on, when I select one of the DXpeditions frequencies,
the window turns red (that shows the band) and the frequency shown
remains the same. So, I have to select the band to show the regular
FT8 frequency, then manually tune the rig to the DXpedition frequency
and all seems fine. I can't understand why WSJT-X won't change the
frequency on my rig when I select it.
I'm running the latest release of WSJT-X, Windows 10, and an ICOM
IC-7300.
73,
John
John L. Broughton
www.wb9vgj.us
wb9...@arrl.net
2silverhon...@gmail.com
On 6/28/2018 4:46 AM, Neil Zampella wrote:
You can easily take care of this by creating a separate Configuration
for Fox & Hound mode.
Very easily done, you don't have to edit frequencies until you know
of a new DXPedition you wish to contact, and you don't have to worry
about changing any other settings that may mess up your normal FT8
usage.
I have to Fox & Hound configurations set up, one for my KX3, and one
for my K2.
Neil, KN3ILZ
On 6/28/2018 3:10 AM, Saku wrote:
Hi
While just entering in Baker frequencies I got an idea:
What about adding Add Frequency dialog's Mode selection FT8-hound
(perhaps also fox)? Selecting either one would cause also
corresponding Checkbox set/reset in Advaced tab at normal usage time
( as user friendly property)
When selecting either one at Add frequency dialog, on setting time,
pressing OK could also prompt a splash "are you sure...etc." if fox
or hound selecton is tried to set with ordinary frequency. And vice
versa if not ordinary frequency prompt "should you use hound (fox?)
mode setting" would appear.
--
Saku
OH1KH
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
---
This email has been checked for viruses by AVG.
https://www.avg.com
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
