Ensure you don't have the other frequency on a separate slice. That may be
confusing things.Just put on one slice and it should behave.
de MIke W9MDB
On Saturday, October 27, 2018, 2:05:02 AM CDT, Star Light
<starlite4...@gmail.com> wrote:
Thanks for the response.
As I mentioned in my post, it doesn’t work just fine on one slice. That’s one
of the reasons I posted the question.
Does anybody have any actual knowledge about this?
Thanks, Russ
Sent from my iPhone
On Oct 25, 2018, at 9:16 PM, Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
I don't know why you would need separate slices to work split in WSJT-X.
Aren't slices really for different frequency ranges?
Split in WSJT-X is all inside the audio band pass of one slice. It just
adjusts the frequency so that the audio is always in the 1500-2000Hz
offset.Split is really designed for rigs (or operators) that have harmonics on
their signal (usually from incorrect audio settings).As long as you aren't
hitting the ALC on your Flex your signal would be clean and split is not
needed.But it should work just fine on one slice.
de Mike W9MDB
On Thursday, October 25, 2018, 5:55:03 PM CDT, Star Light
<starlite4...@gmail.com> wrote:
Hello, I have WSJT-X (v1.9.1) set up with my Yaseu FTdx9000 to operate full
(not “fake") split and it works great. WSJT-X seems to always listen on the A
side and set Tx on the B side (no matter how it’s set initially) and moves the
B side Tx freq around in a logical way.
I’m not sure how to set up the corresponding configuration on my Flex. At
present I have it set to the A slice and listening through DAX 1 on the B slice
(to be “split”). It makes odd freq adjustments that don’t make sense on the A
Tx slice, never changes Tx to the B slice and never moves the DAX slice choice
no matter how I set it up. I don’t know what it is assuming and can’t see any
way to “tell it” it’s listening on the B slice. I don’t know if it assumes
that in setup or something else but seems to work best when set up this way
from a simply making contacts point of view.
If I set Tx and DAX audio both on the A slice (always choosing split in
config), it will actually activate the B slice from time to time but never
set’s DAX audio output from it, or Tx to it. So it can’t actually be using the
B slice for anything. Then shortly after it activates it, it deactivates it.
Flex is a drop-down option so I know WSTJ-X “knows” about it, I just know how
it expects the physical radio to be set up to use it in split mode. Any advice
would be appreciated! Thanks, Russ KR6W
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
