Il 28/10/18 12:29, Bill Somerville ha scritto: > On 28/10/2018 13:45, Black Michael via wsjt-devel wrote: >> The directions are missing the phrase "if your rig is capable of >> it". Kind of assumes everybody understands this stuff. >> >> Bandwidth settings are on of the big variables on rigs and have >> generally gotten wider as the years have gone on. >> >> So...if your FT-100 cannot widen bandwidth you are stuck with what >> you have. But, either Fake It or Rig Split settings will allow you >> to work whatever you can see as long as your bandwidth covers >> 1500-2000Hz. >> >> de Mike W9MDB >> > Hi Mike, > > the FT8 DXpedition mode instructions are written assuming the user has > working CAT control for their rig, it is not impossible to use > DXpedition mod without CAT control but there are limitations when > doing so. One such limitation is that you must work within the Tx > passband of your rig. > > 73 > Bill > G4WJS. > > Bill, *GWJS*,
Be so kind please to confirm me if a YAESU FT-100 *with* CAT control , is capable to strictly follow WSJT-X audio settings as per FT DXpedition mode instructions or not, otherwise I will stay with my doubts. In other words, by using CAT control, could we get some "extra TX/Rx bandwidth" in respect to the one we get without the CAT? Many thanks and best regards! -- 73 de Marco, PY1ZRJ
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
