Hi Bill Audio is via homebrew xfmr iso from internal sound card. PTT is via the CAT connection. Cat connection is outboard USB to serial dongle into 9 pin CAT port on rear of rig. This all works FB except with FT8 split function via HRD \
On Dec 10, 2018, at 6:07 PM, Bill Somerville wrote: > On 10/12/2018 22:43, Lawrence Provost wrote: >> I have just upgraded to WSJT-X v2.0. I am operating FT8. When interfacing >> CAT through HRD and using "fake it" for the split HRD and the radio (Yaesu >> FT-450D) both change freq for transmit but only for the FIRST transmission. >> On subsequent transmissions HRD and the radio change for a moment, but then >> revert to the original freg. WSJT-X shows the split during the >> transmissions. (e.g. 7.074 000 changes to 7.074 500 when using the higher >> Tx freqs) If I change Tx freq things will work correctly again but only for >> the FIRST transmission >> >> Things work as expected if I interface the rig directly (without HRD running) >> >> Any ideas? >> > Hi Larry, > > how is your rig connected to your PC for audio PTT and CAT? > > 73 > Bill > G4WJS > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
