Hi Larry,
does it work if you check the "Settings->Radio->Split Operating->Rig"
option?
73
Bill
G4WJS.
On 10/12/2018 23:46, Lawrence Provost wrote:
Hi Bill
Audio is via homebrew xfmr iso from internal sound card. PTT is via the CAT
connection. Cat connection is outboard USB to serial dongle into 9 pin CAT port
on rear of rig. This all works FB except with FT8 split function via HRD
\
On Dec 10, 2018, at 6:07 PM, Bill Somerville wrote:
On 10/12/2018 22:43, Lawrence Provost wrote:
I have just upgraded to WSJT-X v2.0. I am operating FT8. When interfacing CAT through HRD
and using "fake it" for the split HRD and the radio (Yaesu FT-450D) both change
freq for transmit but only for the FIRST transmission. On subsequent transmissions HRD
and the radio change for a moment, but then revert to the original freg. WSJT-X shows the
split during the transmissions. (e.g. 7.074 000 changes to 7.074 500 when using the
higher Tx freqs) If I change Tx freq things will work correctly again but only for the
FIRST transmission
Things work as expected if I interface the rig directly (without HRD running)
Any ideas?
Hi Larry,
how is your rig connected to your PC for audio PTT and CAT?
73
Bill
G4WJS
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
