Reinstall 2.01 and tell us that the problem goes away. There is nothing in
WSJT-X which should make it power sensitive.
My guess is you changed something else in the shack....ANY minor change can
cause RFI problems.
And you didn't explain your grounding system.
Mike
On Tuesday, April 30, 2019, 10:40:39 PM CDT, edfeljose
<[email protected]> wrote:
Hi Mike:But same hardware, no crash before with WSJTX 2.01. 80m was stable.
Wonder why 2.1rc5 crashes and 2.01 not.
73,
Edfel
Sent from my T-Mobile 4G LTE Device
-------- Mensaje original --------De: Black Michael via wsjt-devel
<[email protected]> Fecha: 30/4/19 11:21 PM (GMT-04:00) A: WSJT
software development <[email protected]> CC: Black Michael
<[email protected]> Asunto: Re: [wsjt-devel] WSJTX 2.1 RC5 - First
Impressions, and the Third WAVE...
That is indicative of RFI in the shack. It will interrupt most anything on the
USB bus like audio and cat control.Band specific and power specific are both
indications of RFI.You'll likely find if you transmit full power into a dummy
load you won't have the problem.
Chokes on USB cables in particular and all other cables (ethernet, keyboard,
and such) will help too.
And please explain your grounding system. Many people have a ground rod
outside their shack that is NOT bonded to the house ground (which it should
be). Or, they don't have ALL their shack equipment grounded to the same place
(including your computer and router for example).
de Mike W9MDB
On Tuesday, April 30, 2019, 10:14:47 PM CDT, Edfel Rivera
<[email protected]> wrote:
Hi Bill:
I run one rig with one version of WSJTX. I even uninstalled v2.01 to debug the
80m crash. Using now exclusively WSJTX 2.1 RC5. Here are my findings:
If I reduce Audio Recording levels and IF transmit power is less than half the
power, WSJTX 2.1 will not crash. However IF I increase power program crash
giving hamlib error. Please see attachments. Windows 10 WSJTX 2.1 64bit.
73'
Edfel
KP4AJ
On Tue, Apr 30, 2019 at 11:58 AM Bill Somerville <[email protected]> wrote:
On 30/04/2019 04:37, Edfel Rivera wrote:
> I do have a big problem with a crash when I try the 80m band. I think
> it is related with having two configurations and two WSJTX
> applications installed (even as WSJTX 2.1 RC5 was installed into a
> different directory. The crash makes the Kenwood 590SG PPT to stay ON
> have to press SEND key to stop the PPT.
Hi Edfel,
thanks for your detailed observations which are appreciated and noted.
For the above issue, can you give more details of your WSJT-X shack
setup. I am not sure if you are using multiple instances of WSJT-X
simultaneously with multiple rigs, or some other arrangement.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
