Hi All: I noticed this behavior and try move to another frequency to respect the original calling CQ station. Maybe set WSJTX to move to a fixed (extreme end) freq after answering a CQ, say 3000. Just an idea.
73' Edfel KP4AJ On Sun, Jul 28, 2019 at 4:14 PM Jim Brown <k...@audiosystemsgroup.com> wrote: > On 7/28/2019 12:56 PM, Gary Kohtala - K7EK via wsjt-devel wrote: > > Also those that call my station with a signal report on their first > > transmission (no full callup and no grid). > > > > I ignore folks like that. If they don't start the contact with a full > > set of calls and grid square there will be no joy for them. > > Hmmm. What's your problem with that? I see only three good reasons to > call with grid first and no signal report. 1) It's a contest that > requires the grid, so VHF contest mode is in use; 2) the calling station > is in a location not consistent with his callsign, so you know where to > point your antenna; or 3) you're on VHF, where collecting grids is > common practice. And even then, you can get the grid from LOTW. > > Since I'm a K9 call operating from NorCal, I usually call with my grid, > for reason #2. > > When 6M is open to JA, calling stations almost always call with the > signal report first. If you don't respond, you'll be the one with no > joy. And, BTW, almost all of my 6M FT8 JA QSOs (about 50) are in LOTW! > > 73, Jim K9YC > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel