Hi,
I agree with Jim K9YC,
On 6m i prefer that when i call CQ a station coming back to me calls me
with report instead of grid. Openings are very short and QSO flows faster.
Also i prefer that those stations call me off freq.
My program it set to call with report always especially on 6m band.
JA's are using the same kind of sequencing and many more QSO's could be
made during short openings. Theirs discipline and spectrum spreading are
best of all contintines around the globe. Hat down to them all.

About Lids, we had them b4 on CW, SSB and other modes and we will have them
always. When someone makes a QSO with me and later starts to CQ on my freq
i simply delete that QSO if he doesnt move from my freq when i ask him to
QSY.  QSO its saved into the Adif but he will never get a QSO confirmation
of any kind. My rule ;)

73,
Patrik 9A5CW




ned, 28. srp 2019. 22:14 Jim Brown <k...@audiosystemsgroup.com> je napisao:

> On 7/28/2019 12:56 PM, Gary Kohtala - K7EK via wsjt-devel wrote:
> > Also those that call my station with a signal report on their first
> > transmission (no full callup and no grid).
> >
> > I ignore folks like that. If they don't start the contact with a full
> > set of calls and grid square there will be no joy for them.
>
> Hmmm. What's your problem with that? I see only three good reasons to
> call with grid first and no signal report. 1) It's a contest that
> requires the grid, so VHF contest mode is in use; 2) the calling station
> is in a location not consistent with his callsign, so you know where to
> point your antenna; or 3) you're on VHF, where collecting grids is
> common practice. And even then, you can get the grid from LOTW.
>
> Since I'm a K9 call operating from NorCal, I usually call with my grid,
> for reason #2.
>
> When 6M is open to JA, calling stations almost always call with the
> signal report first. If you don't respond, you'll be the one with no
> joy. And, BTW, almost all of my 6M FT8 JA QSOs (about 50) are in LOTW!
>
> 73, Jim K9YC
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to